EZ-Pour Stabilizer

SHAKE WELL BEFORE USE

DOSAGE RATE:

One gallon container will raise a 10,000 gallon (3.8 L will raise a 38 m³) pool's stabilizer concentration 32 ppm.

DIRECTIONS:

Use a reliable test kit to determine stabilizer concentration in water. If the pool water tests less than 40 ppm (parts per million) add EZ-Pour Stabilizer to obtain a level of 40-100 ppm. One gallon container will raise a 10,000 gallon (3.8 L will raise a 38 m³) pool’s stabilizer concentration 32 ppm.

1. Turn on circulation pump.
2. Shake product well before use.
3. Slowly add entire gallon of EZ-Pour Stabilizer into the pool in front of a return jet.
4. Rinse container with pool water and shake. Repeat step #3.
5. Re-balance your swimming pool in accordance with the guidelines below.

NOTE: It is normal for the pool water to become cloudy following application for a short period of time. Allow 30 minutes for the pool to clear.

• Maintain pH in the range of 7.4 to 7.6.
• Maintain total alkalinity in the range of 60 to 120 ppm.
• Maintain calcium hardness range between 200-400 ppm.
• Maintain available chlorine level at 2-4 ppm.

Active Ingredients:
Cyanuric Acid - 25-28%
Inert Ingredients - 72-75%
Total - 100% CAUTION
Hazardous to humans and domestic animals. May cause eye irritation. Keep out of reach of children. HANDLING AND USAGE
Wear safety glasses, gloves and protective clothing when handling this product.
After handling, wash hands before eating or drinking. Do not mix with other chemicals. HAVE THE PRODUCT CONTAINER OR LABEL WITH YOU WHEN CONTACTING DOCTOR OR POISON CONTROL. STORAGE & DISPOSAL
Keep contents dry in tightly closed original container.