skip to Main Content

Filter & Tile Cleaner



Remove grimy build-up and waterline marks with Lo-Chlor Filter & Tile Cleaner. The easy-to-use spray bottle cleans most outdoor surfaces without affecting the pool water chemistry.


  • SUPER non-acidic multi-purpose cleaner
  • Use full strength; no mixing or pouring
  • Degreases cartridge filters and D.E. grids
  • Great on BBQ grills, patio furniture, tubs & sinks
  • Cleans tile line without affecting water chemistry
  • Why stock many products when one product does it all?
  • Convenient quart spray bottle

Now Lo-Chlor has made it so easy to keep your outdoor surfaces clean and shiny. To clean most any surface, simply hose it down, spray on Filter & Tile Cleaner; let it work its magic for a minute and hose off.

Cleaning filters, either DE or cartridge is easy; just hose down, spray on and hose off. Done. Pool tiles at water line; spray on and rinse off. Works great on wood decks, PVC furniture, painted cement surfaces, and grill tops. Spray on and rinse off. You’re done! Really grimy surfaces may require a second spray and a bit of a wipe.

Filter & Tile Cleaner will not affect the balance of your pool chemistry. And your yard is so much more inviting when it is clean and free from the grit and grime that can accumulate over time.

Dosage and Directions

Dosage and Directions Tab

Dosage Rates:

Use as needed.

Directions for General-Purpose Cleaning:

Spray on surface to be cleaned. Brush or sponge area, then rinse.

Directions for Cartridge Filters and DE Grids:

Remove filter element from housing and use water hose to clear large debris from filter/element.

Spray Method:
Spray product into all pleats and crevices. Allow to soak for 5-10 minutes then rinse with plenty of fresh water. Replace filter/element.

Soak Method:
Partly fill a large bucket with water then add contents of Lo-Chlor Filter & Tile Cleaner to water. Place filter element in bucket and add water to bucket until element is completely covered or bucket is full. If filter is too large for bucket, soak one end of filter then flip filter element. Keep both ends damp by flipping occasionally. Allow filter to soak for a minimum of one hour. Soak up to 8 hours for deep cleaning. Remove filter element from bucket and rinse with plenty of fresh water. Replace filter element. Note: Spot testing of vinyl liners is recommended, especially patterned vinyl.

Strongly alkaline. Avoid contact with skin, eyes and mucous membranes. Wear eye and skin protection. Wash thoroughly after handling. FIRST AID-INGESTION: Do NOT induce vomiting. Give water to drink and contact a physician. EYES: Hold eyes open and flood with water for at least 15 minutes. Contact a physician. SKIN: Remove contaminated clothing and rinse skin immediately with plenty of water. Avoid exposure to concrete and pavers. Rinse quickly.


Specifications Tab
SKU FAT123-12 FAT05-1 TVS240-1
Unit Size 12 per case 1 Jug 1 Drum
Volume 946mL 18.9 L 208 L
Cases per Pallet 48 cases - 4 drums
Shipping Weight 14.5 kg 21.7 kg 241.7 kg

Product Resources

Product Resources Tab


Back To Top