Lo Phos Max^®

Dosage Rates:

If algae are present, add a treatment of Lo-Chlor 90-Day Algicide prior to beginning phosphate removal. Clean or backwash filters and ensure pool water is balanced. Test pool water for phosphate levels using a test kit approved for swimming pool use. Using the chart below, measure the required quantity of Lo-Chlor Lo-Phos Max for your pool. Slowly add Lo-Phos Max directly to the pool, distributing over as wide an area as possible.

Directions for Use:

1. Immediately following the addition of Lo-Chlor Lo-Phos Max, place one Lo-Chlor Miraclear Pool Clarifier Tab in pump basket (follow package directions) OR use 59 mL of Miraclear Blue Liquid Clarifier per 15 m³ of pool water. The addition of clarifier will help clear the cloudiness associated with phosphate removal.
2. Run filtration system continuously for 24 hours. Check filter pressure regularly and backwash, if necessary.
3. Retest phosphate level of pool water at least 24 hours after treatment. If necessary, repeat dosage of Lo-Chlor Lo-Phos Max at weekly intervals until phosphate level is within acceptable range. For faster results, Lo-Phos Max dosage can be repeated at 24-hour intervals. Refer to above chart for dosage rate.
4. Test pool regularly for residual phosphate levels.
5. To maintain phosphate level below 125 ppb (parts per billion), add 90 mL per 48 m³ of water surface (approx. 56,800 L) per week.